Wrapping a gift basket

With Easter approaching, I thought it would be timely to share how to wrap a gift basket. With this technique your basket will look just as good as the professional ones in the store. Simple directions below.



Supplies:
Basket - I recommend getting one at the thrift store. They're just as good as anything you would buy at the store and usually cost less than a dollar.
Magazine or catalog
Scissors
Tape
Cellophane

Fill your basket 2/3 full with crumpled magazine paper (step 2). Cover all of the crumpled paper with one piece of paper (step3). Cover with shredded paper or Easter grass (step 4).

Arrange the gifts starting at the back with the taller pieces and work your way to the front with the shorter pieces. This makes the gifts look more appealing and helps hold the smaller items in place. If you need support to stand an item up, use decorative cardboard to place in the back of the basket. In the past I've used cardboard from boxes covered in wrapping paper.

Place the basket in the center of the cellophane and pull the cellophane up so it's folded in half. Refer to picture.

Fold the right side behind the basket (refer to picture). Secure with tape. Fold the left side and secure with tape. Sometimes there's excess cellophane that needs to be cut back to make it more workable. Bunch up the top of the cellophane over the basket toward the back and secure with a rubber band. Make sure the cellophane in the front of the basket doesn't bunch up at all. Sometimes it takes a little finessing to get it perfect. Tie a ribbon over the rubber band. Done.

This is what the back of the basket will look like.

Read more...

Kids theme parties - Party hats

A kid’s birthday party is not complete without a party hat!

They can come in many shapes and sizes but they all have one thing in common… they add to the liveliness and festive feeling of any party.

They can be made from balloons, from newspaper or tissue paper, they can be adorned with feathers, glitter, sequins, colourful buttons, flowers or streamers, the choice is yours. Party hats can be shaped like a cone, a top hat, a simple band with Mickey Mouse or Bunny ears, a pirate hat, a witch hat… as with so many crafts, your imagination is the only drawback when it comes to the kind of hat you will make for your kid’s theme party.

The easiest party hat you can make yourself is the conical party hat. diagram for a cone shaped party hatDraw a triangle on a piece of stiff cardboard or coloured paper – size 12″ x 18″ – use the 12″ as the height and the 18″ as the size to go around the head. Change the straight bottom line to a curve:

Decorate as desired, then glue the edges together and leave to dry. (Use paperclips to hold the hat together while it is drying). Staple both ends of a thin piece of elastic string onto opposite sides of the bottom edge of the hat so it fits under the chin.

A golden rule when planning your kids’ theme parties is to let them be a part of the planning from the beginning, so the older kids will really enjoy making their own party hats.


Read more...

How to Make A Baby Bib From Old Towels

Go baby bibs and Wall Street money goes; too much. Save pennies instead of spending purchased in lots of money, their own simple and cheap way to make sure.



Pattern bib baby’s need, one is your correct free-hand drawings in good or if you do not (Internet) information highway hit us liking free patterns to find. Print and cut it. Now, all your feeds and head that collects table, kitchen, counters, floors or sewing room.

Layouts, flat, and towels are placed on your patterns. The model’s markers and pens. Repeat this process until the baby towel bib overall there is form; cuts off all pennies. With the help of matching or contrasting thick yarn or wire around every edge cover stitch sewing start bib. This gives the bib, decorative appearance, and to prevent it, bleaching and Ravel.

Almost completed; now, cut a strip of Velcro or a tape loop n about 2 inches long and may be to hook up. Bib (goes around the neck portion) band hooks are just part of the sewing area opposite band loop sewn today. Alto! Your baby’s bib. Repeat this process until all pennies.

Read more...

How to build a Letter Holder

A letter holder is not only practical but can also adorn a passage, entry or other suitable wall and it is relatively easy to make.



This letter holder allows letters from the mailbox to be sorted and stored into individual pockets awaiting collection from different family members. As well, car key hooks along the bottom of the letter holder will help ensure that the letters will be seen by the people they are intended for. Below is a Materials List and required tools list.
On subsequent pages there are step-by-step instructions accompanied by photos and detailed plans.

Materials list

1 of 600mm x 600mm (2ft x 2ft) Sheet of 4.5mm (3/16") thick mdf, plywood or similar type panel board. (Specifications allow for a bit of wastage.)

1 of 2000mm (80") length of 45mm x 19mm (3/4"x 1 1/2") wood. (Specifications allow for a bit of wastage.)

50 panel pins (i.e. small thin nails 25mm (1") long.)

15 wood screws 38mm (1 1/2") long.

5 key hooks.

A bit of PVA wood glue and some sandpaper.

A drawing of all the parts can be seen below

Required tools

Hammer Hand saw Jig-saw Carpenter's pencil Measuring tape Drill Drill bit (slightly thicker than the screw shank)

Step 1

How to shape the wood for a letter rack



Measure and mark all the pieces to be cut according to the plans. Use plates and cups as templates to mark the curves (see the curved shapes).

Step 2
Parts for a wooden letter holder


Cut all the pieces and drill the screw holes in parts [c] and [e].
The positions of the holes are shown in the parts plan

Step 3
Wooden letter holder assemble parts [d] and [e]

Screw member [e] to members [d].
Step 4
Wooden letter holder assemble parts [e] and [f]

Screw member [e] to member [f].

Step 5
Wooden letter holder assemble parts [d] and [e]

Screw members [c] to members [e and f].

Step 6
Wooden letter holder assemble add part [b]

Glue and nail the front piece [b] to members [c, d and e].

Step 7
Wooden letter holder assemble add part [a]

Turn the unit over then glue and nail the back piece [a] to members [c, d and e].

Step 8
Wooden letter holder assemble. add the key hooks

Drill a hole (to allow for hanging) at the top of the back piece [a] and add key hooks to member [f].

Drawings:
(1). Firstly, the plan with all the dimensions.
(2). Secondly, a drawing of all the parts also showing where to drill the screw holes.
(3). Thirdly, a drawing showing how to make the curved shapes.


The parts
[a] Back board
[b] Front board
[c] End vertical members also showing the positions of the screw holes
[d] Intermediate vertical members
[e] Bottom upper horizontal member also showing the positions of the screw holes
[f] Bottom lower horizontal member


The curved shapes
Below is a drawing explaining how to make the curved shapes. Plates and cups can be used as patterns. See photo.


Read more...

Another way to make a baby changing mat

To wear your baby anywhere if you want to change the diaper changing mat provides a clean surface. Quick and easy pillow diapers can make Matt baby. Or can any fabric to sew a selection of custom carpet. Select to create a flannel back table cross-vinyl carpet clean wipes, or comfortable cotton fabrics to select, and then if necessary, wash your mat machine. Make some to keep the bag or car in hand House, changing mat. You can provide a mat evolution as baby shower gifts.



Modify the custom sewn mats.

Stick with two fabrics per each 30 inch to 15-inch cut. The deburring, as required.

The batter throws flour to a flat surface. Place a small piece of tissue to rest on the first part of the fabric cloth and the top of the right stick.

Near the end pin carpets around deploys all three layers.

On the long side to sewing the three layers, and then start together 1 / 2 inch edge removed from the PIN, comes to them. Through open three or four the translation out carpet of evolution “.

Organization and change mat layer between right through. Hides the stitches near the limit could close the fabric inside opening and closing open more carefully.

Run time up to around 1 / 2 inch from the edge of the transfer pad. Sew the other changes in the bi-directional pad to form a large corner site for x. Change the movement free quilt surface Matt.

Mutation or mat of storage or transport roles.

Change cover matte

Cut into sticks pillow-sized.

Drag the end of the stick pillow fine and smooth openings carefully. Near the edge of the boundary of pillows to PIN through all three layers. Depending on the distance pillow last open to trim the stick held fast to the.

Sew around the edge 1 / 2 inch completely, deleting only the PIN cover.

Sew along one inch from the edge of cover equal to the end.

Forming elsewhere in bars for large x in the bi-directional square pillow to sew. Change the movement free quilt surface Matt.

Mutation or mat of storage or transport roles.

Read more...