Make A Notebook In 5 Minutes

Read more...

Make your own notebook

Is the recycling stack precariously high? Make all that paper into something useful again. Cat Davison gives a new lease of life to scrap paper with a simply bound notebook


The great thing about binding your own books - apart from the sheer thrill of making something you were going to throw away into something you were going to buy - is that you can make it as easy or as complicated as you like. You can rustle up a coverless, warts-and-all notepad for shopping lists and daily plans in under 30 minutes, or labour away at a work of art with specially bought paper for a day or more.

What you need

A stack of paper
A ruler
A pencil
A thick sewing needle
Strong string or thread
A thick needle topped with a wedge of cork (or a mini hand-drill)
A small clamp (if you have one)
A cutting mat

What to do

1. Stack all your papers together. It doesn't matter if they are different textures, colours or thicknesses - I find this actually makes the book more interesting - they just need to be cut to one size (of your own choosing).

2. With all the papers aligned against their left-hand edge, place them on your cutting mat. Using a ruler, mark a light line with your pencil down the left-hand edge, about 1-2cm in. Mark increments down this line, between 1-2cm apart. Remember the more widely spaced the increments, the longer your stitches will be, and the quicker your book will take to sew. The shorter, the more labour-intensive, but also the more refined.

3. Align all your pages once more on the cutting mat. If you have a small clamp, use this to fix the pages to something solid, like the corner of a table. If not, press down hard on the top of your stack and start pushing through your increments with a thick needle or drill. Depending on how thick your book is you might be able to do this in one go. If not, separate your pages into sections, mark each one up, push through the holes and then combine.

4. Thread your needle. Although this might go against every sewing sensibility you have, tie a knot around the head of the needle (this prevents the thread from escaping when you push it through the paper).

5. Push your needle from underneath your stack at the bottom hole, leaving a good 12.5cm of string spare when you pull the thread through. Don't tie a knot at the end.

6. Weave your way up the spine of the book, threading each hole. When you reach the top, go back the other way so that each hole has been gone through twice and you have a continuous line of thread up the spine.

7. When you reach the bottom, cut the needle loose and tie the two spare threads together - I like a lavish bow!
And another thing ...

You can add a hardback cover to your book by cutting two pieces of card to the same size as your notebook. Placing both on top, cut them again so that the bind is showing - this normally involves lopping off a centimetre or so from the left-hand edge. Get some tough fabric, cut it to the height of your book and make sure it wraps around the spine and covers a good few centimetres of the card. Using PVA, glue it around the spine, attaching it to the cards so they 'hinge' off the fabric.


Read more...

A cool hand-made tool organizer

Need a simple, easy to make tool organizer? I had the thought that it would be better to have a vertical tool organizer instead of having the tools lie all over the work area. Using styrofoam and cardboard, an effective tool holder is made.

Step 1: Gather Materials


For this simple project, you will need cardboard, styrofoam (EPS foam, actually) a craft knife or box cutter, a hotwire machine if possible, some glue and a rubber band

Step 2: Prepare Foam Blanks for Cutting


Here, a piece of foam is selected to be the holder for the pair of pliers shown. With a pencil or sharpie, trace silhouette onto the foam.

Step 3: Cut Out All Tool Holders From Foam



In this step, all pieces are cut with the hotwire machine. A craft knife can be used also, you are just limited in thickness of foam. Use many strokes to cut with a knife, taking care not to tear foam.

Step 4: Glue foam to cardboard


For each tool piece, cut and glue appropriate foam piece to the pre-cut cardboard. For this project, I had four tools to organize, hence four pieces of foam and four pieces of cardboard.

Step 5: Complete Pieces for each tool.

The four tools in this project and their foam pieces cut and glued to cardboard.

Step 6: Complete Project


The final product...Note how footprint of holder is about equal to the space one tool occupies. This way you can tell at a glance if all tools are in place, and they are easily grasped for doing your work. I used a rubber band to hold the modules together, but they can be enclosed in a "box" made of cardboard, masonite, matboard, or so on. I left it at this point as I might want to add to it in the future, but don't want to make it too big.
Step 7: Tool Organizer Makeover

I decided to update, improve and decorate my tool holder....time on my hands!

Read more...

Hand made gum paste roses using no cutter

How to make quick & easy GUM PASTE & FONDANT ROSES USING NO CUTTERS OR MODELLING TOOLS .....New sugarcraft modelling ideas









Read more...